Product Overview

VG7000 Series Bronze Control Valves Product Bulletin 29
The reconditioning kits for VG7000 Series Valves
include all the components necessary to return a valve
to near new condition. These kits are available
according to the convenient features and options
format shown in Table 26. A descriptive list of the
components in each kit is given below. Note that
1-1/2 and 2 in. two-way N.C. and three-way valves
incorporate a stem guide in the bottom body of the
valve.
The stem guide is integral for N.C./PDTO valves and
the lower body for three-way valves. Depending on the
wear condition of this part, it may or may not need to be
replaced. While replacement is always recommended,
these parts are available as an optional component
included in the kit or ordered separately. The code
numbers for these parts are listed in Table 27.
For N.O./PDTC valves with brass trim, the kit contains
the bonnet, packing, and stem and plug assembly.
For N.C./PDTO and three-way valves with brass trim,
the kit contains:
• stem and plug assembly
• all packing components
• bonnet
• bottom cap/lower body (optional for 1-1/2 and 2 in.
valves only)
For N.O./PDTC valves with stainless steel trim, the kit
contains:
• preassembled bonnet, packing, and stem and plug
assembly
• stainless steel seat
For N.C./PDTO and three-way valves with stainless
steel trim, the kit contains:
• stem and plug assembly
• stainless steel seat (two for three-way valves)
• all packing components
• bonnet
• bottom cap/lower body (optional for 1-1/2 and 2 in.
valves only)
Technical Specifications
Table 27: Lower Body Kits
Code Number Valve Type End
Connection
VG7000-6101 1-1/2 in. Brass,
N.C./PDTO
Bottom Cap
VG7000-6105 1-1/2 in. Brass,
Three-Way
NPT
VG7000-6106 2 in. Brass,
N.C./PDTO
Bottom Cap
VG7000-6110 2 in. Brass,
Three-Way
NPT
VG7000-6111 1-1/2 in. Stainless
Steel, N.C./PDTO
Bottom Cap
VG7000-6115 1-1/2 in. Stainless
Steel, Three-Way
NPT
VG7000-6116 2 in. Stainless
Steel, N.C./PDTO
Bottom Cap
VG7000-6120 2 in. Stainless
Steel, Three-Way
NPT
VG7000 Series Bronze Control Valves
1
(Part 1 of 3)
Service
2
Hot Water, Chilled Water, 50/50 Glycol Solutions, or Steam for HVAC
Systems (Fluid Group 1 According to 67/548/EEC)
Valve Body Size/Cv (kv) 1/2 in. 0.73 (0.63), 1.8 (1.6), and 4.6 (4.0)
3/4 in. 7.3 (6.3)
1 in. 11.6 (10)
1-1/4 in. 18.5 (16)
1-1/2 in. 28.9 (25)
2 in. 46.2 (40)
Valve Stroke 5/16 in. (8 mm) for 1/2 or 3/4 in. Valves
1/2 in. (13 mm) for 1 and 1-1/4 in. Valves
3/4 in. (19 mm) for 1-1/2 and 2 in. Valves
Valve Body Rating Meets requirements of ANSI B16.15, Class 250 (EN 12360).