Valve Install Instructions

VG7000 Series Bronze Control Valves Product Bulletin2
Ordering Data
Table 2: Ordering Data — VG7000 Series Bronze Control Valves
1
V G Valve Global
1 2 7 Product Family 7 = Cast Bronze
3 2 Body Type 2 = Two-Way, Normally Open/Push-Down-to-Close
4 4 = Two-Way, Normally Closed/Push-Down-to-Open
5 = Two-Way Angle, Normally Open/Push-Down-to-Close
8 = Three-Way Mixing
4 End Connections 4 = Threaded National Pipe Thread (NPT)
5 5 = Union Globe/Union Angle (1/2 through 1-1/2 in. Body
Sizes, PDTC Only, Brass Trim Valves Only))
7 = Union Sweat, 3/8 in. Tubing (1/2 in. Body Size Only,
Brass Trim Valves Only))
8 = Union Sweat, Standard Tubing (Brass Trim Valves
Only)
9 = Union Sweat, 3/4 in. Tubing (1/2 in. Body Size Only,
Brass Trim Valves Only))
1 Trim and Flow
Characteristics
1 = Brass Equal Percentage (All Two-Way and 1/2 in.
Three-Way)
6 2 = Brass Linear (Three-Way Only)
3 = Stainless Steel Equal Percentage (Two-Way Only)
4 = Stainless Steel Linear (Three-Way Only)
L Size and Cv (Kv) C = 1/2 in., 0.73 Cv (0.63 Kv)
7 E = 1/2 in., 1.8 Cv (1.6 Kv)
G = 1/2 in., 4.6 Cv (4.0 Kv)
L = 3/4 in., 7.3 Cv (6.3 Kv)
N = 1 in., 11.6 Cv (10.0 Kv)
P = 1-1/4 in., 18.5 Cv (16.0 Kv)
R = 1-1/2 in., 28.9 Cv (25.0 Kv)
S = 2 in., 46.2 Cv (40.0 Kv)
T Stem Type T = Standard Threaded Stem (All Except V-3801, MP84,
VA-8x2x)
8 S = Slotted Stem and Small Bonnet (Factory-Mounted
V-3801, VA-8x2x Only; Only Brass Trim Valves)
M = Large Threaded Stem (Factory-Mounted MP84 Only,
Only Stainless Steel Trim Valves)
+ Actuator
Mounting
+ = Factory-Mounted Actuator
(See Table 3 and Table 4.)
9 (Leave Fields 9 through 15 blank for valve without
factory-mounted actuator. Valve without factory-mounted
actuator is available with standard threaded stem only.)
1 23456789101112131415 = Field
V G7 241LT + Example: Cast bronze valve, two-way, normally open/push-down-to-close,
threaded (NPT) end connections, brass trim, equal percentage,
3/4 in., 7.3 Cv, standard threaded stem.
Valve + Actuator
1. See Table 3 when adding a factory-mounted pneumatic actuator to a valve body. See Table 4 when adding a
factory-mounted electric actuator to a valve body. For valid valve and actuator combinations, see Table 16 and Table 17.