Valve Install Instructions

VG7000 Series Bronze Control Valves Product Bulletin26
Repair Information
If the VG7000 Series Bronze Control Valve fails to
operate within its specifications, see the Maintenance
and Accessories and Reconditioning Kits sections for a
list of repair parts and reconditioning kits available. For
a replacement valve, contact the nearest
Johnson Controls representative.
Maintenance and Accessories
The maintenance parts available for the
VG7000 Series Valves are listed in Table 23. See
Table 24 for a list of available accessories.
Table 23: Maintenance Parts (Order Separately)
Code Number Description
VG7000-6001 Ring Pack Packing Kits for Brass Trim Valves:
Single Pack for 1/4 in. Stem (1/2 or 3/4 in. Valves)
Kit Includes: two ring packs (U-cup with installed O-ring), one stem wiper, one insertion/
removal tool, one bullet, one grease tube, and one 3 in. (76 mm) strip of crocus cloth
VG7000-6002 Single Pack for 3/8 in. Stem (1 through 2 in. Valves)
Kit includes: two ring packs (U-cup with installed O-ring), one stem wiper, one stem guide, one
insertion/removal tool, one sleeve packing installer, one grease tube, and one 3 in. (76 mm)
strip of crocus cloth
VG7000-6011 PTFE V-Ring Packing Kits for Stainless Steel Trim Valves:
Single Pack for 1/4 in. Stem, SS Trim (1/2 or 3/4 in. Valves)
Kit includes: two Teflon® V-rings, one rubber V-ring, two Teflon stem wipers, one Teflon stem
guide, one Teflon bushing, one steel washer, one spring, one insertion/removal tool, one
bullet, one grease tube, and one 3 in. (76 mm) strip of crocus cloth
VG7000-6012 Single Pack for 3/8 in. Stem, SS Trim (1 through 2 in. Valves)
Kit includes: two Teflon V-rings, one rubber V-ring, two Teflon stem wipers, one Teflon stem
guide, one Teflon bushing, one steel washer, one spring, one insertion/removal tool, one
sleeve packing installer, one grease tube, and one 3 in. (76 mm) strip of crocus cloth