Valve Install Instructions

VG7000 Series Bronze Control Valves Product Bulletin 9
Field Mounting
A standard bonnet/stem design allows for easy field
mounting of actuators. See Table 2 to order valves
without actuators; Table 7, and Table 8 to order the
appropriate mounting kits; and Table 16 and Table 17
to identify compatible actuators. Refer to the
appropriate actuator product bulletin for specific
actuator code number information.
Table 7: Field Mounting Kits for Pneumatic Actuators
1
Actuator Style
Valve Size, in. (DN)
2
Spring Range psig (kPa) Mounting Kit
Code Number
T-3x11
V-3000-8012
V-3000-8003
1/2 or 3/4 (DN15 or DN20)
5/16 in. (8 mm) Stroke
3 to 6 (21 to 41) VG7000-1001
3
4 to 8 (28 to 55) VG7000-1002
3
9 to 13 (62 to 90) VG7000-1003
3
T-3x11
V-3000-8012
V-3000-8003
1 or 1-1/4 (DN25 or DN32)
1/2 in. (13 mm) Stroke
3 to 6 (21 to 41) VG7000-1004
3
4 to 8 (28 to 55) VG7000-1005
3
9 to 13 (62 to 90) VG7000-1006
3
T-3x11
V-3000-8012
V-3000-8003
1-1/2 or 2 (DN40 or DN50)
3/4 in. (19 mm) Stroke
3 to 6 (21 to 41) VG7000-1007
3
4 to 8 (28 to 55) VG7000-1008
3
9 to 13 (62 to 90) VG7000-1009
3
V-3801-8001 1/2 or 3/4 (DN15 or DN20)
5/16 in. (8 mm) Stroke
3 to 6 (21 to 41) VG7000-1010
3
4 to 8 (28 to 55) VG7000-1011
3
9 to 13 (62 to 90) VG7000-1012
3
V-3801-8001 1/2 or 3/4 (DN15 or DN20)
5/16 in. (8 mm) Stroke
Kit with Three Springs:
3 to 6, 4 to 8, and 9 to 13 (Includes
hardware to adapt one valve only.)
VG7000-1015
3
MP82/MP83 1/2 or 3/4 (DN15 or DN20) with Stainless
Steel Trim
Not Applicable MP8000-6701
4
MP82/MP83 1 through 2 (DN25 through DN50) with 1/4 in.
Stem and Stainless Steel or Brass Trim
Not Applicable MP8000-6702
4
MP84/MP85 1-1/2 through 2 (DN40 through DN50) with
3/8 in. Stem and Stainless Steel Trim
Not Applicable MP8000-6703
5
1. Use all mounting kits with valves with standard threaded stem design only.
2. DN is the European designation for body size in metric units (mm).
3. The mounting kits include: upper spring seat, spring, stem extension, stem locking screw (or set screw), and a
bonnet adaptor for the V-3801-8001.
4. The mounting kits include: stem nut (1), stem extender nuts (2), stem extender (1), and yoke nut (1).
5. The mounting kit includes: stem nuts (2) and yoke nut (1).
Table 8: Field Mounting Kits for Electric Actuators
1
Actuator Style Valve Size, in. (DN) Mounting Kit Code Number
VA-4233 1/2 through 1-1/4 (DN15 through DN32) None Required
VA-715x 1/2 through 2 (DN15 through DN50) None Required
VA-720x 1 through 2 (DN25 through DN50) None Required
VA-8x2x Not available for field mounting.
VA78x0 1/2 through 2 (DN15 through DN50) None Required
1. Use all mounting kits with valves with standard threaded stem design only.