Operator's Manual
Table Of Contents
- Table of Contents
- 1 — Introduction
- 2 — Warnings, Cautions, and Other Residual Risks
- 3 — System Components
- 4 — Surgery Start Up
- 5 — Surgeon Settings
- 6 — Program Settings
- 7 — System Configuration
- Setting the Maximum IV Pole Height
- Testing the IV Pole
- Event Log
- Wireless Foot Pedal Setup
- VERITAS Remote Control Setup
- System Versions
- System Self Test
- Language Selection
- Surgical Media Center (SMC) (Optional)
- Set System Date and Time
- Set Units of Measure for Vacuum
- Service Interval
- Import/Export Database
- Backup All
- Print to File
- Restore Database
- Restore All
- Delete a Backup Database
- 8 — Symbol Definitions
- 9 — Care and Cleaning
- 10 — Error Messages, Troubleshooting, and Diagnostics
- 11 — Warranty and Maintenance
- 12 — Specifications
- Physical Specifications
- Environmental Specifications
- Electrical Specifications
- Electromagnetic Compatibility
- RF Wireless Technology
- Bluetooth Characteristics
- Phacoemulsification Specifications
- Irrigation and Aspiration Specifications
- Vitrectomy Specifications
- Diathermy Specifications
- Diathermy Power Graphs
- Diathermy Power versus Load Impedance
- Phaco Power Graphs
- Phaco Tip Velocity
- Bottle Height Pressure
- 13 — Accessories and Parts Reordering
- Index
Foot Pedal Setup Z370584 Rev. C
5-20
Surgeon Settings
7. Tap the Finished button to:
accept your choice of switch assignment
close the Switch Assignment dialog box
return to the edit screen
Repeat the process for all switches.
8. Tap the Save button to retain the switch assignments.
9. Tap Exit to close the Foot Pedal Set Up screen.
VERITAS Foot Pedal Threshold Configuration
Follow the steps below to configure the thresholds for the foot pedal.
NOTE: In addition to showing the type and status of the foot pedal, the foot pedal icon
(shown below) in the top of the screen also allows access to the Foot Pedal Settings
screen.
1. On the Surgeons and Programs screen, tap or .
2. Tap the Thresholds button under Foot Pedal. The system displays the foot pedal
thresholds screen.
Bottle Down Lowers the IV pole while the switch is held down.
Reflux Activates reflux.
Continuous Irrigation Activates or deactivates continuous irrigation.
1-Touch Up Increments CASE mode 1-Touch. (Phaco only)
1-Touch Down Decrements CASE mode 1-Touch. (Phaco only)
Toggle CASE Activates or deactivates CASE MODE (Phaco only)
Switch Setting Description