Operator's Manual
Table Of Contents
- Table of Contents
- 1 — Introduction
- 2 — Warnings, Cautions, and Other Residual Risks
- 3 — System Components
- 4 — Surgery Start Up
- 5 — Surgeon Settings
- 6 — Program Settings
- 7 — System Configuration
- Setting the Maximum IV Pole Height
- Testing the IV Pole
- Event Log
- Wireless Foot Pedal Setup
- VERITAS Remote Control Setup
- System Versions
- System Self Test
- Language Selection
- Surgical Media Center (SMC) (Optional)
- Set System Date and Time
- Set Units of Measure for Vacuum
- Service Interval
- Import/Export Database
- Backup All
- Print to File
- Restore Database
- Restore All
- Delete a Backup Database
- 8 — Symbol Definitions
- 9 — Care and Cleaning
- 10 — Error Messages, Troubleshooting, and Diagnostics
- 11 — Warranty and Maintenance
- 12 — Specifications
- Physical Specifications
- Environmental Specifications
- Electrical Specifications
- Electromagnetic Compatibility
- RF Wireless Technology
- Bluetooth Characteristics
- Phacoemulsification Specifications
- Irrigation and Aspiration Specifications
- Vitrectomy Specifications
- Diathermy Specifications
- Diathermy Power Graphs
- Diathermy Power versus Load Impedance
- Phaco Power Graphs
- Phaco Tip Velocity
- Bottle Height Pressure
- 13 — Accessories and Parts Reordering
- Index
Surgeon Settings
Z370584 Rev. C Foot Pedal Setup
5-25
1. On the Surgeons and Programs screen, tap .
The system initially displays the Summary information on the Foot Pedal Settings screen.
Each major surgical mode (Phaco, IA, Vitrectomy, and Diathermy) has individual settings
for the foot pedal switches. In addition, both Phaco and Vitrectomy modes have
individual settings per submode for the foot pedal switches.
Figure 5-21 — Advanced Control Pedal Phaco Summary Screen
2. Tap the Switches button to change the settings for the switches. The system displays the
Advanced Control Pedal Edit screen. The Advanced Control Pedal Edit screen allows you
to assign or change the action for each of the four switches.