Operator's Manual
Table Of Contents
- Table of Contents
- 1 — Introduction
- 2 — Warnings, Cautions, and Other Residual Risks
- 3 — System Components
- 4 — Surgery Start Up
- 5 — Surgeon Settings
- 6 — Program Settings
- 7 — System Configuration
- Setting the Maximum IV Pole Height
- Testing the IV Pole
- Event Log
- Wireless Foot Pedal Setup
- VERITAS Remote Control Setup
- System Versions
- System Self Test
- Language Selection
- Surgical Media Center (SMC) (Optional)
- Set System Date and Time
- Set Units of Measure for Vacuum
- Service Interval
- Import/Export Database
- Backup All
- Print to File
- Restore Database
- Restore All
- Delete a Backup Database
- 8 — Symbol Definitions
- 9 — Care and Cleaning
- 10 — Error Messages, Troubleshooting, and Diagnostics
- 11 — Warranty and Maintenance
- 12 — Specifications
- Physical Specifications
- Environmental Specifications
- Electrical Specifications
- Electromagnetic Compatibility
- RF Wireless Technology
- Bluetooth Characteristics
- Phacoemulsification Specifications
- Irrigation and Aspiration Specifications
- Vitrectomy Specifications
- Diathermy Specifications
- Diathermy Power Graphs
- Diathermy Power versus Load Impedance
- Phaco Power Graphs
- Phaco Tip Velocity
- Bottle Height Pressure
- 13 — Accessories and Parts Reordering
- Index
Surgeon Settings
Z370584 Rev. C Set Sound Levels
5-39
4. Press each of the four switches. When a switch is pressed, the On button for that switch
turns green and its Off button turns white. When you release the switch, the On button
for that switch turns white and its Off button turns green.
5. Tap Finished when you complete the testing of your foot switch.
6. Tap Exit to close the Foot Pedal Set Up screen.
Set Sound Levels
Default Settings
Table 5.9 – VERITAS Vision System Default Sound Settings
The VERITAS System provides two sets of tone options—VERITAS and WHITESTAR
SIGNATURE PRO. You can select the tone preference by tapping either VERITAS or
WHITESTAR SIGNATURE PRO. Once you select your preferred tone, you can hear a sample
of the selected tone by adjusting the volume.
Global Parameters
Sounds Available Settings Default Settings
Tone Option VERITAS/WHITESTAR SIGNATURE PRO VERITAS
High Vacuum On, Off On
Mode Change Off, Tone, Voice Voice On
Submode Change Off, Tone, Voice Voice On
Value Change On, Off Off
Activity Confirmation On, Off On
Vacuum Tone Off-10 8
Diathermy Tone 5–10 5
Phaco Tone Volume 0-10 0
Error Tone 5–10 5
Irrigation Tone Off-10 7
Key Press Tone Off–10 6
Speech Off–10 5
CASE Volume 0–10 0
Master Volume 0–10 7