Operator's Manual
Table Of Contents
- Table of Contents
- 1 — Introduction
- 2 — Warnings, Cautions, and Other Residual Risks
- 3 — System Components
- 4 — Surgery Start Up
- 5 — Surgeon Settings
- 6 — Program Settings
- 7 — System Configuration
- Setting the Maximum IV Pole Height
- Testing the IV Pole
- Event Log
- Wireless Foot Pedal Setup
- VERITAS Remote Control Setup
- System Versions
- System Self Test
- Language Selection
- Surgical Media Center (SMC) (Optional)
- Set System Date and Time
- Set Units of Measure for Vacuum
- Service Interval
- Import/Export Database
- Backup All
- Print to File
- Restore Database
- Restore All
- Delete a Backup Database
- 8 — Symbol Definitions
- 9 — Care and Cleaning
- 10 — Error Messages, Troubleshooting, and Diagnostics
- 11 — Warranty and Maintenance
- 12 — Specifications
- Physical Specifications
- Environmental Specifications
- Electrical Specifications
- Electromagnetic Compatibility
- RF Wireless Technology
- Bluetooth Characteristics
- Phacoemulsification Specifications
- Irrigation and Aspiration Specifications
- Vitrectomy Specifications
- Diathermy Specifications
- Diathermy Power Graphs
- Diathermy Power versus Load Impedance
- Phaco Power Graphs
- Phaco Tip Velocity
- Bottle Height Pressure
- 13 — Accessories and Parts Reordering
- Index
Program Settings
Z370584 Rev. C Edit a Program Name
6-5
Edit a Program Name
1. Select a program name on the list.
2. Tap .
3. Enter a different program name or tap Standard Names and select a new name from the
Standard Names list. See “Create a New Program” on page 6-1.
4. Tap Enter.
Lock a Program
1. Tap on the Surgeons and Programs screen (Figure 6-1) to lock a program.
Figure 6-5 — Confirm Program Lock Button
2. Tap Yes.
NOTE: Once you lock a program you cannot unlock the program. You can edit the locked
program to use different settings during surgery, but you cannot save or overwrite
the program settings once done. You cannot delete the default locked programs from
the Standard Surgeon. You can delete all locked default programs from custom
surgeons, but there must be at least one program defined for a custom surgeon.
Copy a Surgeon Program
You can copy the settings of one surgeon program for use by another surgeon. To copy a
surgeon program:
1. Tap .
2. Select a surgeon and program from the Copy Program list.
3. Tap Enter.
4. Tap if you need to edit the name of the program.