Operator's Manual
Table Of Contents
- Table of Contents
- 1 — Introduction
- 2 — Warnings, Cautions, and Other Residual Risks
- 3 — System Components
- 4 — Surgery Start Up
- 5 — Surgeon Settings
- 6 — Program Settings
- 7 — System Configuration
- Setting the Maximum IV Pole Height
- Testing the IV Pole
- Event Log
- Wireless Foot Pedal Setup
- VERITAS Remote Control Setup
- System Versions
- System Self Test
- Language Selection
- Surgical Media Center (SMC) (Optional)
- Set System Date and Time
- Set Units of Measure for Vacuum
- Service Interval
- Import/Export Database
- Backup All
- Print to File
- Restore Database
- Restore All
- Delete a Backup Database
- 8 — Symbol Definitions
- 9 — Care and Cleaning
- 10 — Error Messages, Troubleshooting, and Diagnostics
- 11 — Warranty and Maintenance
- 12 — Specifications
- Physical Specifications
- Environmental Specifications
- Electrical Specifications
- Electromagnetic Compatibility
- RF Wireless Technology
- Bluetooth Characteristics
- Phacoemulsification Specifications
- Irrigation and Aspiration Specifications
- Vitrectomy Specifications
- Diathermy Specifications
- Diathermy Power Graphs
- Diathermy Power versus Load Impedance
- Phaco Power Graphs
- Phaco Tip Velocity
- Bottle Height Pressure
- 13 — Accessories and Parts Reordering
- Index
System Configuration
Z370584 Rev. C VERITAS Remote Control Setup
7-9
VERITAS Remote Control Setup
VERITAS Remote Control Pairing
Follow the steps below to pair the VERITAS Remote Control to the system with a wireless
Bluetooth connection.
1. On the main screen, tap Configuration.
2. Tap Wireless Setup.
3. On the Wireless Setup dialog box, tap Remote Control (Figure 7-4).
Figure 7-8 — Remote Control Pairing Screen
4. Follow the instructions on the screen to pair the VERITAS Remote Control. Cancel
Pairing can be used to abort the pairing process. Unpair can be used to clear the pairing
of the foot pedal from the console.
5. Tap Pair.
If the green light is off, the remote is not awake. Press any button on the remote to
wake it up.