Operator's Manual
Table Of Contents
- Table of Contents
- 1 — Introduction
- 2 — Warnings, Cautions, and Other Residual Risks
- 3 — System Components
- 4 — Surgery Start Up
- 5 — Surgeon Settings
- 6 — Program Settings
- 7 — System Configuration
- Setting the Maximum IV Pole Height
- Testing the IV Pole
- Event Log
- Wireless Foot Pedal Setup
- VERITAS Remote Control Setup
- System Versions
- System Self Test
- Language Selection
- Surgical Media Center (SMC) (Optional)
- Set System Date and Time
- Set Units of Measure for Vacuum
- Service Interval
- Import/Export Database
- Backup All
- Print to File
- Restore Database
- Restore All
- Delete a Backup Database
- 8 — Symbol Definitions
- 9 — Care and Cleaning
- 10 — Error Messages, Troubleshooting, and Diagnostics
- 11 — Warranty and Maintenance
- 12 — Specifications
- Physical Specifications
- Environmental Specifications
- Electrical Specifications
- Electromagnetic Compatibility
- RF Wireless Technology
- Bluetooth Characteristics
- Phacoemulsification Specifications
- Irrigation and Aspiration Specifications
- Vitrectomy Specifications
- Diathermy Specifications
- Diathermy Power Graphs
- Diathermy Power versus Load Impedance
- Phaco Power Graphs
- Phaco Tip Velocity
- Bottle Height Pressure
- 13 — Accessories and Parts Reordering
- Index
Symbol Definitions
Z370584 Rev. C
8-3
IPX6 is the Ingress Protection code that indicates that the device is protected
against powerful water jets.
Caution: Federal (USA) law restricts this device to sale by or on the order of a
licensed healthcare practitioner.
Market approval for radio products in Japan granted by the Ministry of Internal
Affairs and Communications (MIC)
Indicates Rated supply voltage(s) or rated voltage range(s); number of phases and
type of current; rated supply frequency or rated frequency range in hertz; for
Class II ME Equipment, symbol IEC 60417-5172
Indicates compliance with IEC 60601-1-2 Ed. 4.0: 2014, “Electromagnetic
Compatibility Requirements and Tests for Medical Electrical Equipment.”
ETL Listed Mark
Universal Serial Bus (USB) port
FUSION mode button used to open the CASE and the Occlusion mode settings
screen.
Foot pedal not connected to system icon. This icon appears when the foot pedal
is not connected to the system. Either connect a foot pedal with a cable or
wirelessly.
Symbol Definition