Operator's Manual
Table Of Contents
- Table of Contents
- 1 — Introduction
- 2 — Warnings, Cautions, and Other Residual Risks
- 3 — System Components
- 4 — Surgery Start Up
- 5 — Surgeon Settings
- 6 — Program Settings
- 7 — System Configuration
- Setting the Maximum IV Pole Height
- Testing the IV Pole
- Event Log
- Wireless Foot Pedal Setup
- VERITAS Remote Control Setup
- System Versions
- System Self Test
- Language Selection
- Surgical Media Center (SMC) (Optional)
- Set System Date and Time
- Set Units of Measure for Vacuum
- Service Interval
- Import/Export Database
- Backup All
- Print to File
- Restore Database
- Restore All
- Delete a Backup Database
- 8 — Symbol Definitions
- 9 — Care and Cleaning
- 10 — Error Messages, Troubleshooting, and Diagnostics
- 11 — Warranty and Maintenance
- 12 — Specifications
- Physical Specifications
- Environmental Specifications
- Electrical Specifications
- Electromagnetic Compatibility
- RF Wireless Technology
- Bluetooth Characteristics
- Phacoemulsification Specifications
- Irrigation and Aspiration Specifications
- Vitrectomy Specifications
- Diathermy Specifications
- Diathermy Power Graphs
- Diathermy Power versus Load Impedance
- Phaco Power Graphs
- Phaco Tip Velocity
- Bottle Height Pressure
- 13 — Accessories and Parts Reordering
- Index
Symbol Definitions
Z370584 Rev. C
8-5
ELLIPS FX handpiece is attached.
VERITAS Swivel handpiece is attached.
Occlusion Mode Indicator. This indicator displays on the Phaco mode surgical
screen to indicate Occlusion Mode is enabled. During surgery, this indicator
highlights in green if the vacuum threshold is tripped and the defined occluded
settings of the current Phaco submode applies.
Reload – The reload button cycles through the surgeon’s programs.
Continuous Irrigation – Used to turn continuous irrigation on or off.
Continuous Irrigation Auto-Off – Indicates the Cont. Irr. Auto-Off feature is
turned on.
Bottle Height icon – Indicates the selected surgical program settings is
customized for Advanced Fluidics surgical settings.
Advanced Infusion icon – A gray colored icon indicates the selected surgical
program settings is customized for the Advanced Infusion surgical settings. If the
icon is shown in blue, the infusion source is pressurized to have an additional 22
mmHg (30 cm) to the bottle height.
Help – Only active when there is an error. Tap this icon to show possible solutions
to clear the error.
Symbol Definition