Operator's Manual
Table Of Contents
- Table of Contents
- 1 — Introduction
- 2 — Warnings, Cautions, and Other Residual Risks
- 3 — System Components
- 4 — Surgery Start Up
- 5 — Surgeon Settings
- 6 — Program Settings
- 7 — System Configuration
- Setting the Maximum IV Pole Height
- Testing the IV Pole
- Event Log
- Wireless Foot Pedal Setup
- VERITAS Remote Control Setup
- System Versions
- System Self Test
- Language Selection
- Surgical Media Center (SMC) (Optional)
- Set System Date and Time
- Set Units of Measure for Vacuum
- Service Interval
- Import/Export Database
- Backup All
- Print to File
- Restore Database
- Restore All
- Delete a Backup Database
- 8 — Symbol Definitions
- 9 — Care and Cleaning
- 10 — Error Messages, Troubleshooting, and Diagnostics
- 11 — Warranty and Maintenance
- 12 — Specifications
- Physical Specifications
- Environmental Specifications
- Electrical Specifications
- Electromagnetic Compatibility
- RF Wireless Technology
- Bluetooth Characteristics
- Phacoemulsification Specifications
- Irrigation and Aspiration Specifications
- Vitrectomy Specifications
- Diathermy Specifications
- Diathermy Power Graphs
- Diathermy Power versus Load Impedance
- Phaco Power Graphs
- Phaco Tip Velocity
- Bottle Height Pressure
- 13 — Accessories and Parts Reordering
- Index
Symbol Definitions
Z370584 Rev. C
8-7
Language – Tap this button on the Configuration screen to select the language
used for the user interface.
Set Vacuum Units – Tap this button on the Configuration screen to set the
vacuum units to either mmHg or kPa.
Surgical Media Center (SMC) – Tap this button on the Configuration screen to
format how the SMC starts to record surgery.
Service Interval – Tap this button on the Configuration screen to view when the
next time maintenance is due on the system.
Import/Export Database – Tap this button on the Configuration screen to import
or export a database to or from the system.
Restore Database – Tap this button on the Configuration screen to restore a
database if the current database is corrupted.
Backup All – Tap this button on the Configuration screen to save data to a USB
device.
Restore All – Tap this button on the Configuration screen to restore data from a
USB device.
Add Surgeon or Program – Tap this icon to add a surgeon to the list of surgeons
or a program to the list of programs.
Symbol Definition