Operator's Manual
Table Of Contents
- Table of Contents
- 1 — Introduction
- 2 — Warnings, Cautions, and Other Residual Risks
- 3 — System Components
- 4 — Surgery Start Up
- 5 — Surgeon Settings
- 6 — Program Settings
- 7 — System Configuration
- Setting the Maximum IV Pole Height
- Testing the IV Pole
- Event Log
- Wireless Foot Pedal Setup
- VERITAS Remote Control Setup
- System Versions
- System Self Test
- Language Selection
- Surgical Media Center (SMC) (Optional)
- Set System Date and Time
- Set Units of Measure for Vacuum
- Service Interval
- Import/Export Database
- Backup All
- Print to File
- Restore Database
- Restore All
- Delete a Backup Database
- 8 — Symbol Definitions
- 9 — Care and Cleaning
- 10 — Error Messages, Troubleshooting, and Diagnostics
- 11 — Warranty and Maintenance
- 12 — Specifications
- Physical Specifications
- Environmental Specifications
- Electrical Specifications
- Electromagnetic Compatibility
- RF Wireless Technology
- Bluetooth Characteristics
- Phacoemulsification Specifications
- Irrigation and Aspiration Specifications
- Vitrectomy Specifications
- Diathermy Specifications
- Diathermy Power Graphs
- Diathermy Power versus Load Impedance
- Phaco Power Graphs
- Phaco Tip Velocity
- Bottle Height Pressure
- 13 — Accessories and Parts Reordering
- Index
Z370584 Rev. C
8-8
Symbol Definitions
Delete Surgeon or Program – Tap this icon to delete a surgeon from the list of
surgeons or a program from the list of programs.
Edit Surgeon or Program Name – Tap to edit the surgeon or program name.
Foot Pedal Settings – Tap to set up or edit the foot pedal settings.
Sound Settings – Tap to set the volume settings for the system.
Move Doctor Name Up – Select a surgeon name on the list of surgeons and use
this icon to move the doctor’s name up the list. This can be used to alphabetize
the list of surgeons.
Move Doctor Name Down – Select a surgeon name on the list of surgeons and
use this icon to move the doctor’s name down the list. This can be used to
alphabetize the list of surgeons.
Settings – Tap to set the specific surgical program settings.
OR
Surgeon Settings – Tap to set the specific surgeon settings.
Symbol Definition