Operator's Manual
Table Of Contents
- Table of Contents
- 1 — Introduction
- 2 — Warnings, Cautions, and Other Residual Risks
- 3 — System Components
- 4 — Surgery Start Up
- 5 — Surgeon Settings
- 6 — Program Settings
- 7 — System Configuration
- Setting the Maximum IV Pole Height
- Testing the IV Pole
- Event Log
- Wireless Foot Pedal Setup
- VERITAS Remote Control Setup
- System Versions
- System Self Test
- Language Selection
- Surgical Media Center (SMC) (Optional)
- Set System Date and Time
- Set Units of Measure for Vacuum
- Service Interval
- Import/Export Database
- Backup All
- Print to File
- Restore Database
- Restore All
- Delete a Backup Database
- 8 — Symbol Definitions
- 9 — Care and Cleaning
- 10 — Error Messages, Troubleshooting, and Diagnostics
- 11 — Warranty and Maintenance
- 12 — Specifications
- Physical Specifications
- Environmental Specifications
- Electrical Specifications
- Electromagnetic Compatibility
- RF Wireless Technology
- Bluetooth Characteristics
- Phacoemulsification Specifications
- Irrigation and Aspiration Specifications
- Vitrectomy Specifications
- Diathermy Specifications
- Diathermy Power Graphs
- Diathermy Power versus Load Impedance
- Phaco Power Graphs
- Phaco Tip Velocity
- Bottle Height Pressure
- 13 — Accessories and Parts Reordering
- Index
Symbol Definitions
Z370584 Rev. C
8-9
More – Opens additional settings screens.
Save – Used to save changes made to settings during surgery.
Save As – Located on the Program Settings screen. Used to save the program
with a new name.
Restore Program – Located on the Program Settings screen. Used to change the
settings back to the previous saved settings.
Restore Submode – Located on the Program Settings screen. Used to change the
submode settings to the previous saved settings.
Lock Program – Tap to lock the settings for the selected program. You cannot
unlock a program once the program is locked.
Copy Program – Tap to copy an existing program and rename to a new program.
Move Program Name Up – Select a program name on the list of programs and use
this icon to move the program’s name up the list. This can be used to alphabetize
the list of programs for the active surgeon. The name at the top of the list
becomes that surgeon’s default program.
Move Program Name Down – Select a program name on the list of programs and
use this icon to move the program’s name down the list. This can be used to
alphabetize the list of programs for the active surgeon.
Symbol Definition