Operator's Manual
Table Of Contents
- Table of Contents
- 1 — Introduction
- 2 — Warnings, Cautions, and Other Residual Risks
- 3 — System Components
- 4 — Surgery Start Up
- 5 — Surgeon Settings
- 6 — Program Settings
- 7 — System Configuration
- Setting the Maximum IV Pole Height
- Testing the IV Pole
- Event Log
- Wireless Foot Pedal Setup
- VERITAS Remote Control Setup
- System Versions
- System Self Test
- Language Selection
- Surgical Media Center (SMC) (Optional)
- Set System Date and Time
- Set Units of Measure for Vacuum
- Service Interval
- Import/Export Database
- Backup All
- Print to File
- Restore Database
- Restore All
- Delete a Backup Database
- 8 — Symbol Definitions
- 9 — Care and Cleaning
- 10 — Error Messages, Troubleshooting, and Diagnostics
- 11 — Warranty and Maintenance
- 12 — Specifications
- Physical Specifications
- Environmental Specifications
- Electrical Specifications
- Electromagnetic Compatibility
- RF Wireless Technology
- Bluetooth Characteristics
- Phacoemulsification Specifications
- Irrigation and Aspiration Specifications
- Vitrectomy Specifications
- Diathermy Specifications
- Diathermy Power Graphs
- Diathermy Power versus Load Impedance
- Phaco Power Graphs
- Phaco Tip Velocity
- Bottle Height Pressure
- 13 — Accessories and Parts Reordering
- Index
VERITAS Remote Control Z370584 Rev. C
3-16
System Components
Figure 3-14 — VERITAS Remote Control Key Functions
After you turn the system on, press any button to activate the VERITAS Remote Control.
NOTE: After four to six minutes of idle time, the VERITAS Remote Control goes into a power-
save mode. To turn the VERITAS Remote Control on, press any button.
1. Reload 7. Mode/Submode Down
2. IV Pole Up/Down 8. Navigator Increment
3. Wireless Connection Indicator 9. Navigator Select
4. Battery Indicator 10. Navigator Decrement
5. Mode/Submode Up 11. Navigator Left
6. Mode/Submode Select 12. Navigator Right