User Manual

Hold Button

Push this button once to enter hold mode. Pressing this button once

will lock the current angle reading displayed on the LCD. The word

HOLD will appear at the top of the display to remind you that you are in

the HOLD function. Press this button once again to exit the hold mode.

Sound Button

Push this button once to enter the sound function mode. The sound symbol

will appear on the LCD and there will be 4 different types of sound.

1. Between 10° - 5° or 80°- 85° there is a slow beep

2. Between 4.9° - 1° or 85.1° - 89° there is a faster beep

3. Between 0.9° - 0.1° or 89.1° - 89.9° there is a rapid beep

4. 0° and 90° there is a continuous sound

Press this button again to exit the sound mode.

The sound will turn off after 20 seconds of non-movement of the

digital level. The sound will return when the digital level is moved.

Backlight Button

Push this button once to turn on the backlight function. The LCD

backlight will stay on for approximately 30 seconds with no movement

of the level. Any push of a button or movement of the level will turn the

backlight back on. To exit the backlight function, push this button again.

Calibrate Button

Push this button to enter calibration mode. See Calibration section for

more information on how to calibrate this digital level.

7640H-English_Manuals 12/11/13 4:18 PM Page 7