6022H-English_Manuals 7/20/12 11:15 AM Page 1 Manual-Leveling Rotary Laser Model No. 40-0922 Instruction Manual Congratulations on your choice of this Manual-Leveling Rotary Laser. We suggest you read this instruction manual thoroughly before using the instrument. Save this instruction manual for future use. This is a Class IIIa laser tool and is manufactured to comply with CRF 21, parts 1040.10 and 1040.11 as well as international safety rule IEC 285.
6022H-English_Manuals 7/20/12 11:15 AM Page 2 Table of Contents 1. Contents 2. Features and Functions 3. Safety Instructions 4. Location/Content of Warning Labels 5. Location of Parts/Components 6. Operating Instructions 7. Using the Product 8. 9. 10. 11. 12. 13. 14. Self-Check & Fine Calibration Technical Specifications Application Demonstrations Care and Handling Product Warranty Warranty Registration Accessories 1.
6022H-English_Manuals 7/20/12 11:15 AM Page 3 3. Safety Instructions Please read and understand all of the following instructions, prior to using this tool. Failure to do so, may void the warranty. DANGER! Class IIIa Laser Product Max. Power Output: ≤ 5mW Wavelength: 640nm-660nm THIS TOOL EMITS LASER RADIATION. DO NOT STARE INTO BEAM. AVOID DIRECT EYE EXPOSURE. ATTENTION IMPORTANT • Read all instructions prior to operating this laser tool. Do not remove any labels from tool.
6022H-English_Manuals 7/20/12 11:15 AM Page 4 4.
6022H-English_Manuals 7/20/12 11:15 AM Page 5 5.
022H-English_Manuals 7/20/12 11:15 AM Page 6 6. Operating Instructions IMPORTANT: It is the responsibility of the user to verify the calibration of the instrument before each use. Battery Installation Unscrew the cover on the back top of the unit and insert four (4) AA batteries (not included). Follow polarity on housing. Note: Used/discharged batteries are hazardous waste and must be disposed of properly.
6022H-English_Manuals 7/20/12 11:15 AM Page 7 7. Using the Product To turn on, rotate the on/off and variable speed switch in the direction indicated by the arrow. Use this on/off and variable speed control knob to create a single laser point or an intermittent line or a continuous line. The slower the rotation, the more visible the beam will be. If used with an optional detector, use fastest rotation speed.
6022H-English_Manuals 7/20/12 11:15 AM Page 8 8. Self-Check & Fine Calibration IMPORTANT: It is the responsibility of the user to verify the calibration of the instrument before each use. Checking for Accuracy: Wall Vertical Line Platform Horizontal Reference Line 1. Start by placing the laser 1’ away from a wall (near wall), and at least 20’ from a wall (far wall). 2. Align the laser so that one axis (vial) points to both walls. 3.
6022H-English_Manuals 7/20/12 11:15 AM Page 9 7. Then walk over to the original near wall (wall #1) and measure the difference between the original mark and the laser line. If the value is more than 1/8” at 35’, then calibration is required. 8. Ensure accuracy is verified for both the X and Y axis. Note: X and Y axis are determined by the end user, either vial can be considered X/Y. Adjusting Accuracy: 1.
6022H-English_Manuals 7/20/12 11:15 AM Page 10 9. Technical Specifications Laser Wavelength 650nm±10nm Laser Classification Class IIIa Maximum Power Output ≤5mW Accuracy ±1/8"/30 ft. (±0.3mm/m) Interior Range Up to 200 ft. (60m) diameter depending upon light conditions Power Supply 4 “AA” alkaline batteries (not included) Battery Life Approx. battery life 25 hours continuous use Dimensions 4.75" x 4.75" x 6.125" (120 x 120 x 156mm) Weight 1.35 lbs (0.
6022H-English_Manuals 7/20/12 11:15 AM Page 11 10.
6022H-English_Manuals 7/20/12 11:15 AM Page 12 11. Care and Handling • This laser unit is a precision tool that must be handled with care. • Avoid exposing unit to shock vibrations and extreme temperatures. • Before moving or transporting the unit, make sure that the unit is turned off. • Remove the batteries when storing the unit for an extended time (more than three months) to avoid damage to the unit should the batteries deteriorate. • Always store the unit in its case when not in use.
6022H-English_Manuals 7/20/12 11:15 AM Page 13 NOTE: The user is responsible for the proper use and care of the product. It is the responsibility of the user to verify the calibration of the instrument before each use. For further assistance, or if you experience problems with this product that are not addressed in this instruction manual, please contact our Customer Service Dept. In the U.S., contact Johnson Level & Tool’s Customer Service Department at 888-9-LEVELS.
6022H-English_Manuals 7/20/12 11:15 AM Page 14 14. Accessories Johnson® accessories are available for purchase through authorized Johnson® dealers. Use of non-Johnson® accessories will void any applicable limited warranty and there will be NO WARRANTY. If you need any assistance in locating any accessories, please contact our Customer Service Department. In the U.S., contact Johnson Level & Tool’s Customer Service Department at 888-9-LEVELS.