Product Manual

6. Operating Instructions

IMPORTANT: It is the responsibility of the user to verify the

calibration of the instrument before each use.

Battery Installation

Turn on/off button in the counter-clock-

wise direction and completely unscrew

the switch. This will provide you access

to the battery compartment. Insert all

three batteries by following the polarity on the outside of the unit.

Return the switch to the original position.

Note: Used (discharged) batteries are hazardous waste and should be

disposed of properly.

7. Using the Product

With the press of the red power-on/off

button, the instrument will simultaneously

project 3 laser dots through the laser

output windows, and with one more press

of the power-on/off button, the laser dots will turn off. When the

laser dot appears dim, it is time to replace the batteries.

Laser output mode is shown as

follows: