Manual

7. Using the Product

Connecting the Laser to its Base

Position the two slots on the laser into the base, tighten the locking

knob to secure the base to the laser. The laser can now be

secured to a tripod.

Battery Installation

1. Disconnect the laser from the base as shown in the figure on the

next page (rotate the base unlock/lock knob counterclockwise to

unlock the laser from the base).

2. Remove battery cover (rotate the battery compartment knob coun-

terclockwise to the open position).

3. Put in 4 “AA” alkaline batteries following the polarity specified in

the battery compartment.

Base

Unlock/Lock

Knob

Horizontal

Vertical

6697H-English_Manuals 1/31/13 10:54 AM Page 9