Product Manual

Volume Control

The Laser Distance Meter has three volume settings: high, low and

off. When the instrument is powered on, it will default to the most

recently used volume setting.

To change the volume setting, press and hold the button.

The unit will cycle through the three settings (S1 = high, S-2 = low,

Off = mute) until you release the button.

Measuring Modes

The Laser Distance Meter has 7 measuring modes. When the instrument

is powered on, it will default to the Length measuring mode.

1. Length (Single or Continuous)

2. Square

3. Volume/Cube

4. 1-Point Pythagoras

5. 2-Point Pythagoras

6. Stake-out

7. Digital Level

To select a mode, press the button. When there is no measuring

mode icon shown near the top left of the LCD screen, the instrument

is in the Length measuring mode. The selected measuring mode icon

will display near the top left of the LCD screen for the Area, Volume,

1-Point Pythagoras and 2-Point Pythagoras measuring modes. When

in the stake-out mode, the main display will have a flashing

symbol and will read 0.00, with the hundredths decimal place flashing.

2162i-3_Manuals 8/22/17 9:23 AM Page 10