Product Manual

Volume/Cube Measurement Mode

1. Press the button 2 times until the Area/Square mode icon ( )

displays near the top left of the LCD screen.

2. After selecting the desired unit of

measure and reference position, aim the

Laser Distance Meter so that the laser

dot is on the selected target to measure

the length.

3. Keep your position stable and press the

button. The length measurement

will appear above the main display.

4. Aim the Laser Distance Meter so that the laser dot is on the

selected target to measure the height.

5. Keep your position stable and press the button again. The

length and height measurements will appear above the main screen.

6. Aim the Laser Distance Meter so that the laser dot is on the

selected target to measure the width.

7. Keep your position stable and press the button again. The

height and width measurements will appear above the main

screen, and the calculated volume will appear on the main screen.

The laser will turn off.

8. Press the button again to take your next Volume measurement.

2162i-3_Manuals 8/22/17 9:23 AM Page 15