Product Manual

4. Aim the Laser Distance Meter so that the laser dot is on the

selected target to measure the length of the base (represented by

“A” in the figure above).

5. Keep your position stable and press the button again. The

hypotenuse and base length measurements will appear above the

main screen. The indirect height will appear on the main screen

(represented by “B” in the figure above). The laser will turn off.

6. Press the button again to take your next 2-Point Pythagoras

measurement.

1-Point Pythagoras Measurement Mode

This Laser Distance Meter is equipped with

an angle sensor that can be used to both

quickly check an angle (like a digital level)

or to make more advanced 1-point

Pythagoras calculations with only one

measured length reference. Just like the

2-Point Pythagoras mode, the 1-Point

Pythagoras mode uses mathematical

relationships to calculate a distance that

cannot otherwise be measured directly by measuring the angle of the

tool and the length of a triangle hypotenuse.

1. Press the button 4 times until the 1-Point Pythagoras mode

icon ( ) displays near the top left of the LCD screen and the

current value for the angle is displayed as XX.X°.

2162i-3_Manuals 8/22/17 9:23 AM Page 17