Product Manual

2. Press the button 5 times to enter the Stake-out

mode. The main display will have a flashing symbol

and will read 0.00, with the hundredths decimal place flashing. This

number indicates your desired stake-out distance.

3. If you wish to increase or decrease the set stake-out distance by

hundredths of a decimal point (the flashing number), tap the

button to increase the set stake-out distance or tap the

button to decrease the stake-out distance.

4. If you wish to increase or decrease the set stake-out distance by

whole numbers, first press the button. The whole number on the

main display will begin flashing. Press the button to increase the

set stake-out distance or press the button to decrease the

stake-out distance.

5. Aim the Laser Distance Meter so that the laser dot is on the

selected target.

6. While keeping your position stable, press and hold the button.

7. The Laser Distance Meter will begin beeping steadily, and 3

numbers will appear on the LCD screen.

• The top number indicates the set stake-out

distance that you have set.

• The middle number indicates the number

of stake-out points between the unit and

the selected target.

• The bottom number on the main display

indicates the distance between the unit and the selected target.

8. A + or – symbol will flash on the main display to guide you forward

or backward, respectively, to the first stake-out point. As you

approach the stake-out point, the middle number on the LCD

2162i-3_Manuals 8/22/17 9:24 AM Page 19