Product Manual

screen will continually update until it reaches a whole number (the

stake-out point). The unit will beep at regular intervals until you

reach the first stake-out point, at which time it will emit a long beep.

9. Continue following the main display as described in steps 7 and 8

above until you have measured all of your stake-out points.

Digital Level Measurement Mode

The Digital Level measurement mode provides an

angle measurement.

This laser distance meter can be used as a digital

level to measure a vertical angle, shown above as “C.” There are

many benefits to using this mode. Over short distances, it can be used

for spot checking level of floors, countertops, etc. Over long distances,

it can be used to check the angle of rafters or the relative height of

two walls, etc. by using the laser beam as a reference.

To use the Digital Level measurement mode:

1. After selecting the desired reference position, tap the button

6 times until the Digital Level mode icon ( ) displays at the left

of the LCD screen.

2. The angle will show in the main display and will update

continuously as you move the Laser Distance Meter.

2162i-3_Manuals 8/22/17 9:24 AM Page 20