Product Manual

©2017 Johnson Level & Tool 5
4. Location/Content of Warning Labels
Error Code Label
The LDM may return an error code during use, as
indicated by the display showing “ERR X,” where
“X” represents a number from 1 to 6.
The error codes are as follows:
1.
Laser Range
– The measurement distance is
outside the range listed in the specifications.
2.
Weak Signal
– The reflected laser signal is too
weak, either due to high ambient lighting at the
target or poor target reflectivity.
3.
Display Range
– The measurement distance,
area or volume exceeds the number of units the
display is capable of showing.
4.
Low Battery
– The batteries need to be replaced.
5.
Temperature
– The tool is either above the
maximum or below the minimum safe operating
temperature range.
6.
Ambient Light
– The tool is being used in too
bright of an environment to operate properly.
QR Code:
Use a smartphone to scan the QR code to
be taken directly to Johnson Level & Tool’s
Operator’s Manual Page.
2162i-3_Manuals 8/22/17 9:23 AM Page 5