Product Manual

6. Battery Installation

To install batteries in the Laser Distance Meter:

Remove the battery cover by lifting the cover

straight up from the bottom of the Laser

Distance Meter as shown by the arrow in the

image to the right.

2. Insert 2 “AAA” batteries into the battery

compartment according to the polarity

illustrated inside.

3. Replace the battery cover.

Current Battery Status

To check the current battery life, press and hold both the and

buttons simultaneously for one second. The battery icon will display

for approximately 10 seconds.

When the batteries are low, the battery icon will automatically display.

Battery has 100% power

Battery has approximately 60% power

Battery has approximately 25% power

Battery has approximately 5% power,

and new batteries are needed

Notes:

• Use only alkaline batteries.

• Remove the batteries when storing the instrument for an extended

time (more than 3 months) to avoid damage to the tool should the

batteries deteriorate.

2162i-3_Manuals 8/22/17 9:23 AM Page 8