User Manual

minnkotamotors.com
Terrova/Riptide ST:
Problem: Pressing a button on the remote causes all the icons to come
on for a few seconds then they all go off.
Solution: Ensure the motor is deployed and that the System Ready light
on the motor is illuminated.
Solution: Verify that the i-Pilot controller is properly plugged in.
Solution: Try to relearn the remote to the controller.
Solution: Cycle power to the motor by stowing and deploying the motor
verifying that the System Ready light comes back on when the
motor is deployed
PowerDrive V2 /Riptide SP:
Problem: Pressing a button on the remote causes all the icons to come
on for a few seconds then they all go off.
Solution: Verify that the i-Pilot controller is properly plugged into the
footpedal connector on the motor.
Solution: Try to relearn the remote to the controller.
Solution: Cycle power to the motor.
Problem: Steering does not work properly or at all.
Solution: Verify that the steering wires from the i-Pilot cable are properly
connected directly to the two-wire cable coming from the
steering housing.
67
minnkotamotors.com