User Manual

minnkotamotors.com

Remote Battery Replacement

*NOTE: Panasonic brand batteries will not work with the i-Pilot remote.

1. Make sure hands are clean, dry and static free. Discharge any static

electricity by touching a metal object that is grounded.

*Static electricity

can damage the circuit board.

2. With the remote upside down remove the six case screws.

3. Remove the bottom cover.

4. While pushing down

in the middle of the

circuit board lift the

old battery out and

replace with a new

CR2450 coin

cell battery.

5. Replace back cover

and reinstall case

screws. Do not over

tighten case screws

as it will damage the

remote enclosure.

Factory torque setting

is seven inch pounds.

minnk

ota

oto

s.com

Remove battery and replace.