User's Manual

32
minnkotamotors.com
GETTING STARTED
Controls>Resume
When navigation is paused (Spot-Locked), selecting Resume will restart the original
navigation mode. Note that this selection is only available when navigation is
currently paused.
Controls>Reverse
While navigating an iTrack or contour line, selecting Reverse will change the
direction of travel. Note that this selection is only available while navigating these
types of features.
Controls>Record
Select Record to begin recording an iTrack. This selection is also used to return to
the Record Active screen if a recording is in process and the user has brought up a
different screen.
Controls>Arrival Mode
The selections on this menu are used to tell i-Pilot Link what to do when a destination
is reached during certain types of navigation. Use the up/down arrow keys to select
the setting and press the OK key to accept. Select the Back or Close softkey to save
the setting and exit.
a. This same configuration is accessible through the Humminbird.
Controls>Autopilot Mode
From this menu the user configures which version of AutoPilot to use when
AutoPilot is engaged. Use the up/down arrow keys to select the setting and press
the OK key to accept. Select the Back or Close Softkey to save the setting and exit.
a. This same configuration is accessible through the Humminbird.
Controls>Sort Order
The selections on this menu control the order in which navigational points appear on
the GoTo screen. Use the up/down arrow keys to select a new value and press the
OK key to accept. Select the Back or Close softkey to save the setting and exit.
Controls Menu
Controls>Arrival Mode
Controls>Autopilot Mode
CONTROLS MENU
To enter the Controls Menu, select Home>Controls Softkey
Controls>Sort Order