User's Manual

SET THE ARRIVAL MODE

When you are navigating with the i-Pilot Link and reach the destination, set this menu to tell the

system will do next. The setting will determine if you will control the boat manually or

transition to another type of i-Pilot Link navigation after the destination point is reached in a

waypoint, route, or iTrack.

NOTE: The Arrival Mode menu setting does not apply Spot-Lock or Follow the Contour.

Off/Manual returns the unit to manual mode after navigation is ﬁnished. You must be

prepared to take manual control of the boat.

Spot-Lock creates a Spot-Lock and then starts Spot-Lock navigation after navigation

is ﬁnished.

AutoPilot continues navigation towards the set AutoPilot heading.

1. Main Menu: Press the MENU key twice.

2. Select the Accessories tab > i-Pilot Link > Arrival Mode.

3. Press the RIGHT or LEFT Cursor keys to select Off/Manual, Spot-Lock, or AutoPilot

(Default = Off).

From the remote:

1. From the Home screen, select the Controls Softkey>Arrival Mode>OK

2. Use the up/down arrow keys to select a new value and press the OK key to accept.

Select the Back or Close Softkey to save the setting and exit.

I-PILOT SETUP

minnkotamotors.com