User's Manual

78
minnkotamotors.com
AUTOPILOT
FISHFINDER OPERATIONS
From the Humminbird:
START LEGACY AUTOPILOT TOWARDS THE
CURSOR POSITION
Use the cursor to set the heading for Legacy AutoPilot navigation. i-Pilot Link will start navigation
and maintain a constant heading towards the cursor position.
1. Use the 4-WAY Cursor Control key to move the cursor to a position on the chart.
2. Navigation X-Press Menu: Press the MENU key.
3. Select Legacy AutoPilot and press the RIGHT Cursor key.
START LEGACY AUTOPILOT BASED ON THE
BOAT’S HEADING
When you start Legacy AutoPilot navigation without an active cursor, the heading will be
based on the boat’s current position. Legacy AutoPilot continues to navigate the boat in the
same direction.
1. Navigation X-Press Menu: Press the MENU key.
2. Select Legacy AutoPilot and press the RIGHT Cursor key.
ADjUST THE HEADING
1. Navigation X-Press Menu: Press the MENU key.
2. Select Legacy AutoPilot Adjust, and press the RIGHT Cursor key.
3. Adjust: Press the RIGHT or LEFT Cursor keys.
4. Confirm: Press the CHECK/INFO key.
CANCEL AUTOPILOT NAVIGATION
1. Navigation X-Press Menu: Press the MENU key.
2. Select Cancel Legacy AutoPilot and press the RIGHT Cursor key.