User's Manual

minnkotamotors.com

HOW LAKEMASTER CONTOUR WORKS

(ChaRt VIEw Only, lakEMaStER ChaRt REquIRED)

Follow the Contour allows you to navigate a contour on a LakeMaster chart. When you start

i-Pilot Link navigation to follow the contour, all other types of navigation are stopped on the

Humminbird and the Ethernet network.

NOTE: When the i-Pilot Link is following the contour, the current track is not saved,

and iTracks cannot be recorded.

SET UP FOR FOLLOW THE CONTOUR

To use the Follow the Contour feature, a LakeMaster chart card must be installed, and the

Contour Lines must be set to Visible.

1. Install a LakeMaster chart card into the SD card slot.

2. Main Menu: Press the MENU key twice.

3. Select the Chart tab > Contour Lines > Visible.

4. Press the EXIT key until the menu system is closed.

5. Press the VIEW key until the Chart View is displayed.

START FOLLOW THE CONTOUR NAVIGATION

You can start i-Pilot Link navigation if the boat position is within

⁄4 mile of the selected contour.

1. Use the 4-WAY Cursor Control key to move the cursor to a contour line.

2. Press the GOTO key.

3. Select Follow the Contour, and select a navigation direction from the submenu. The

navigation direction will be previewed in orange or gray on the Chart View. See the

illustration Starting Follow the Contour Navigation.

NOTE: To quickly reverse the direction of follow the contour navigation, press the MENU key

once and select Reverse Navigation from the Navigation X-Press Menu.

FOLLOW THE CONTOUR

FISHFINDER OPERATIONS