User's Manual

57
minnkotamotors.com
WAYPOINT
FISHFINDER OPERATIONS
MARK A WAYPOINT
1. Press the VIEW key until a Chart View is displayed on the screen.
2. A Waypoint can be marked as follows:
To save the Waypoint at the boat’s location, press the MARK key.
To save a Waypoint at a cursor position, use the 4-WAY Cursor Control key to move the
active cursor to a position on the Chart View. Then, press the MARK key.
NAVIGATE TO A SAVED WAYPOINT
If a saved Waypoint is within
1
⁄4 mile of the boat position, you can start i-Pilot Link navigation
towards it.
1. From the Chart View, press the GOTO key.
2. Select a Waypoint from the list, and press the RIGHT Cursor key.
OR
1. Use the 4-WAY Cursor Control key to select a Waypoint or position on the chart.
2. Press the GOTO key.
3. Select Go To Position, and press the RIGHT Cursor key.
NAVIGATE TO THE MOST RECENTLY
CREATED WAYPOINT
1. Navigation X-Press Menu: Press the MENU key.
2. Select the Waypoint name (WP), and press the RIGHT Cursor key to open the submenu.
3. Select GOTO, and press the RIGHT Cursor key to start navigation.
Waypoints are saved with an alphanumeric name that stars with WP. The name can be edited and
managed in the Waypoint Management Dialog Box.