User's Manual

20 | minnkotamotors.com
©2014 Johnson Outdoors Marine Electronics, Inc.
gETTing sTARTEd
mAnUAL ConTRoL fUnCTionALiTY
This section describes all Manual Control functions of i-Pilot. A manual function is one in which the operator takes full control of the
function such as manually steering the motor in a desired direction or manually adjusting the prop speed to the desired setting. Any of
these functions do not require a GPS signal.
moToR on/off
To turn the motor on or off press
.
The prop icon on the LCD will be on if the prop is enabled and off if the prop is disabled. With the
prop enabled, the icon will be stationary if the motor speed is zero and the icon will rotate if the motor
speed is greater than zero.
moToR sPEEd ConTRoL
Increase Motor Speed
To increase the motor speed push
on the remote. Each push of will increment the motor
speed by ½ to a maximum of 10.
dECREAsE moToR sPEEd
To decrease the motor speed push
on the remote. Each push of will decrement the motor speed by ½ to a minimum of 0.
The remote LCD will display the current motor speed setting. This is not to be confused with the GPS speed which is also displayed on
the remote LCD.
Prop Enabled Motor Speed Greater
Than Zero
Motor Speed GPS Speed
22 | minnkotamotors.com
©2014 Johnson Outdoors Marine Electronics, Inc.
sECTion TiTLEmAnUAL ConTRoL