User's Manual

26 | minnkotamotors.com

sPoT LoCK

EngAging sPoT LoCK

1. Press

on the remote.

2. The Memory Location icon will ﬂ ash on the remote LCD for three seconds, allowing you to choose a

memory location by pressing

or . Pressing again or waiting for three seconds accepts the

memory location.

disEngAging sPoT LoCK

1. To disengage Spot Lock press any of these buttons:

or .

RE-EngAgE A sAvEd sPoT LoCK LoCATion

1. Manually navigate the boat to within a quarter mile of the saved Spot Lock location. Due to safety

reasons, i-Pilot will not re-engage a saved Spot Lock location greater than a quarter mile away.

2. Press

on the remote.

3. The Memory Location icon will ﬂ ash on the remote LCD for three seconds allowing you to choose a

memory location by pressing

or . Pressing again or waiting for three seconds accepts the

memory location.

sPoT LoCK EsCAPE

1. If the Spot Lock button is accidentally hit, press

or any manual navigation button within three seconds to cancel the

command.

fooT PEdAL oPERATion

• Pressing any foot pedal button will disengage Spot Lock.

• The momentary button on the foot pedal will not function when Spot Lock or Spot Lock Recall is engaged.

Using sPoT LoCK wiTH oTHER i-PiLoT fUnCTions

Since Spot Lock takes over full control of the motor, it cannot be used in combination with other i-Pilot functions.

24 | minnkotamotors.com