User's Manual

Figure 1.
Figure 1.
Figure 1.
Figure 1.
Figure 1.
32 | minnkotamotors.com
©2014 Johnson Outdoors Marine Electronics, Inc.
mAnUAL sTow PRoCEdURE
In the event of a power loss or failure the following procedure shall be used to stow the motor for transport to a service center.
1. Remove Right hand sideplate
2. Using a standard screwdriver pop manual tilt knob off of tilt plates to decouple the tilt motor and tilt bracket (see figure X)
3. Pull manual trim handle located on trim housing out until shaft can be manually trimmed up.
4. Stow motor by manually tilting and trimming in until lower unit is on the ramps.
5. Secure lower unit onto the ramps using the provided emergency strap.