SP Impeller Identification Guide Read and understand this manual prior to operating or servicing this product.
Impeller Identification Guide Take good care of the cooling system Change to a new impeller every year The impeller is a very important security device. Its task is to pump the water through the cooling system of the engine. But remember that the impeller should be replaced every year, at spring launch. This is how to remove the old impeller Remove the impeller with a slip joint plier or a Johnson Impuller. Order No.
Ø 65 mm JP Impeller 09-SP70 replaces Kashijama impeller SP70/SPM70 4 } 50,2 mm
Ø 80 mm Ø 80 mm JP Impeller 09-SP100 } replaces Kashijama impeller SP100/KP100 } 54,1 mm 54,1 mm 5
Ø 93 mm Ø 93 mm JP Impeller 09-SP150 } replaces Kashijama impeller SP150/KP150 } 6 43 mm 43 mm
Ø 93 mm Ø 93 mm JP Impeller 09-SP200 } replaces Kashijama impeller SP200/KP200/SPM200 } 63 mm 63 mm 7
Ø 94,5 mm Ø 94,5 mm JP Impeller 09-SP220 replaces Kashijama impeller SP210/SP220 8 } } 63,4 mm 63,4 mm
Ø 95 mm Ø 95 mm JP Impeller 09-SP280 } replaces Kashijama impeller SP280 } 88,7 mm 88,7 mm 9
Ø 93 mm Ø 93 mm JP Impeller 09-SP300 } replaces Kashijama impeller SP300 10 } 95,5 mm 95,5 mm
Ø 127,78 mm JP Impeller 09-SP500 replaces Kashijama impeller SP500 Ø 127,78 mm } 101,6 mm 11
SPX Flow Technology SPX Flow Technology Örebro AB Nastagatan 19, P.O. Box 1436 SE-701 14 Örebro, Sweden Phone: +46 (0)19 21 83 00 Fax: +46 (0)19 27 23 72 E-mail: johnson-pump.marine@spx.com For more information about our worldwide locations, approvals, certifications, and local representatives, please visit www.johnson-pump.com and www.spxft.com SPX Corporation reserves the right to incorporate our latest design and material changes without notice or obligation.
