User Manual

30
Fig. 28 Ignition mode select and on/off setting
Remark：
1、On/Off mode: Ignition mode and timing mode, on-off mode select ENTER to
switch, the default is ignition mode. (Ignition mode is DRV is on after vehicle
is started, timing mode is on/off time is setting by user).
2、 Delay shut-off setting：After user select ignition mode, user can set if delay
shut-off is needed, if the delay function is set, delay timing also need to be set,
after set, the recording will be continue after vehicle is stall, for setting of
delay time, press <ENTER> and then press digits, range from 1-300 minutes.
3、Timing on/off setting：When setting for this mode, the time for timing on/off
need to be set, after it is saved, MDVR will be on/off according to this time
table. (Note: This function will be activated when restart.)
Fig29 Timing on/off mode