Smart Watch 2166 User Manual
Introduction 2166 is a smart health watch which can monitor multiple body vital signs under many different activity modes. 24/7 Heart Rate Monitor HRV SpO2 Blood Pressure Breath Training Stress Temperature Call & SMS Multi-Sport Mode SOS Waterproof 5 ATM Sleep Tracking Find Phone Music Control Activity Tracking Note: the watch is not a medical device. The test results and suggestions are for reference only.
What’s Included in the Box (1) Watch with detachable band (2) Magnetic USB charger (3) User manual (4) Gift box Heart Rate Sensor SpO2 Sensor Temperature Sensor Home Button Magnetic USB Charger 2
1. Download the APP · Scan the QR code below or search JCHealth on Google Play or iOS App Store to download our JCHealth App. · Make sure the Bluetooth of your mobile device is on. · Choose device identified in App and connect to your smart watch device. JCHealth Note: Please ensure that your Android version is 4.3 or later, iOS version is 9.0 or later. The watch supports Bluetooth 5.1 connection.
2. Charge the Battery Your device is powered by a rechargeable battery. If the battery is less than 5%, the low battery icon will appear to remind you to charge the device. Please use the magnetic USB charger to recharge the device. The display will light on for 10 seconds during charging, then turns off automatically. It takes about 1.5 hours to be fully charged. Low power please charge Magnetic Charging Pins Low Battery Charging Note: 1.
3. Activate and Bind the Device 3.1 When out of the factory, the watch is set into hibernation mode to save the battery. Before use, please charge to activate your watch. After activation, the watch will start charging. Please use your watch only after it is fully charged. 3.2 After the device is activated, you can use the “JCHealth” APP to scan the QR code on the watch screen to bind. Or use the “JCHealth” APP to scan the device ID to bind.
4. Basic Operation Swipe up: Quick setting, can set time format, silent mode, brightness level, lift wrist, music control, find phone, checking battery level, etc. Swipe down: Different social notifications. Swipe left: Check detailed daily activity and sleep reports, to start different Multi-sports mode. Swipe right: Check detailed operation for different functions, e.g. real-time Heart Rate Monitor, SpO2 Monitor,HRV/Stress/ Blood Pressure Monitor, and more function settings.
5. Function Operation 5.1 Heart Rate Monitor Swipe right from home screen to find the Heart Rate icon. The device will automatically start heart rate monitoring. Please wear tightly for accurate heart rate monitoring, otherwise the device will gently vibrate to remind you to wear tightly. 5.2 SpO2 Monitor Swipe right from home screen to find the SpO2 icon. Tap to start SpO2 monitoring. Please wear tightly for accurate SpO2 monitoring, otherwise the device will gently vibrate to remind you to wear tightly.
Swipe right from home screen to find the Vitals icon. Tap it to measure blood pressure, HRV and stress level. Please keep still while measuring. After the measurement, you can slide to check the report. How to measure blood oxygen level (SpO2), HR and other vital signs correctly? SpO2 09:30AM 1 For better accuracy, do keep your arm still, fasten the strap tightly, and make sure the screen is facing up.
2 If you are not wearing your band, or wearing it incorrectly, an error message will be displayed. Please read the onscreen instructions for how to wear it correctly and touch Retry to restart the measurement. 3 During the measurement, keep the screen facing up and your body still. The SpO2 measurement will be paused if you move your arm and the screen will show “Don’t Move”. Please always keep still to get accurate measurement.
8 In order to make the measurement more accurate, it is recommended that you wear it for 3-5min before measuring SpO2/Vital Signs. 9 The watch supports oxygen saturation measurements in the range of 70% to 100%. 5.5 Body Temperature Monitor There are two measurement methods for body temperature: 1 Wear on wrist to get 24H real-time temperature monitoring: wear the smart watch normally and keep the back pressed against your wrist. It can automatically measure your 24H real-time wrist temperature trend.
5.6 Breath Training Swipe left from home screen to find the Exercise icon, slide down to find Relaxation icon. Tap to start breath training.
5.7 Multi-Sport Mode Swipe left from home screen to find the Exercise icon, you can choose Walk, Run, Workout, Cycle, Relaxation, Cricket, Yoga, Climb, Aerobics, Basketball, Badminton, Soccer, Dance, Table Tennis, Rope Jump, Sit-ups, Volleyball or Tennis to take exercises, it can record your exercise data, such as exercise time, steps, distance, speed, heart rate, calories, etc. Detailed exercise report can be checked on the APP.
5.8 More Functions Swipe right from home screen to find the More icon, you can do different Settings, play more functions like Music Control, Stopwatch, Timer, Alarm, Camera, Find Phone, SOS and Temperature. Note: For SOS Help function, first you need to set Emergency Contact (Name & Phone Number) in Personal Info page on APP, up to 3 contacts can be set.
5.9 Settings There are two ways to find the Settings icon: Swipe up to find the Settings icon; or swipe right from home screen to find the More icon, tap to find function menu where you can find the Settings icon. Click the Settings icon, you can set Wallpaper, Screen Time, Power Off and Reset, as well as view more about Battery status and About (Device Info). Note: You can switch different wallpapers or on the watch and APP both, or customize your home screen wallpaper via the APP.
6. Specifications Warranty: 12 Months Main Body Size: 44.5*37.5*10.2mm Weight: approx.36g Display: 1.69inch HD TFT Battery: 240 mAh Lithium Polymer Battery Data Memory: 30 Days Waterproof: 5ATM Activity Time: 99h59min Calories Burned: Max 9999.9kcal Running & Waling Distance: Max 999.99km 7. Precautions for Use (1) Warning! Children swallowing risk! Children are not allowed to play with the device. Keep children away from the device.
eme temperature fluctuations. Protect the device from direct sunlight and dust. (5) When cleaning, do not use any strong chemical, abrasive or foam cleaning materials. Protect the display from hard objects. (6) Do not dispose off the device in domestic waste! If you have any questions, please contact your municipal waste disposal authority. Do not dispose off used batteries in domestic waste. Instead, take them to a special waste disposal site or a retailer’s battery collection point.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
