Specification

Tel [phone] | Fax [phone] | jonard.com
Premier Tool Manufacturer Since 1958
Mid Span Slit & Ring Tools | Data Sheet
Replacement Cartridges
These PATENTED slit and ring tools are designed to open fiber jackets and loose buffer tubes to provide easy fiber access. One
side of the tool slits fiber jackets and loose buffer tubes, the opposite side rings fiber jackets and loose buffer tubes. All this is done
without damage to the fiber. Blades are replaceable. Note: MS-326 is designed for cables used in ducts and microducts.
Simple to use:
• Select the correct groove. Grooves marked with the recommended cable size
• Place the cable in the groove to be used
• Note: The arrow on the top of the tool indicates the pulling direction and the line indicates the blade location
• Close the tool making sure lock is engaged and pull to slit the cable
• For ring operation use ring side of tool and repeat steps above, instead of pulling rotate the tool 3-6 times to ring the cable
SPECIFICATIONS MS-426 MS-326 MS-316 MS-306
DESCRIPTION
Mid Span Slit & Ring Tool
(5.8mm-12mm)
Mid Span Slit & Ring Tool
(5mm-10mm)
Mid Span Slit & Ring Tool
(2.9mm-6.8mm)
Mid Span Slit & Ring Tool
(1.2mm-3.3mm)
NO. OF PRECISION
GROOVES
8 (4 Slitting, 4 Ringing) 10 (5 Slitting, 5 Ringing) 10 (5 Slitting, 5 Ringing) 12 (6 Slitting, 6 Ringing)
CABLE DIAMETERS
(MM
2
)
5.8-6.4, 7.8-8.4, 9.8-10.4,
11.2-12
5.0-5.6, 6.0-6.6, 7.2-7.8,
7.8-8.4, 9.4-10
2.9-3.6, 3.6-4.4, 4.4-5.2,
5.2-6.0, 6.0-6.8
1.2-1.5, 1.5-1.8, 1.8-2.1,
2.1-2.5, 2.5-2.9, 2.9-3.3
CABLE TYPE
Thick-walled jackets (up to
2.0mm thick)
Thin-walled jackets Outer Jackets, Loose Buffer
Tubes
Outer Jackets, Loose Buffer
Tubes
JONARD P/N DESCRIPTION
MS-306RB
Replacement Blades for MS-306
MS-316RB
Replacement Blades for MS-316
MSB-5010
Replacement Blades for MS-326
MS-426RB
Replacement Blades for MS-426
MS-426
MS-326
MS-316
MS-306