Installation & Assembly

782

ASSEMBLY INSTRUCTIONS FOR YOUR

OJAI FLOOR LAMP

(A)

(B)

(C)

(D)

(E)

ASSEMBLY INSTRUCTIONS:

NOTE: Do not connect electricity until lamp is fully assembled.

1. Unpack all parts and remove packing materials. Place lamp base on level surface.

2. Remove ﬁ nial (A) from harp (C). Squeeze harp (C) inward and place into the opening of saddle (D).

3. Place shade (B) onto harp (C). Thread ﬁ nial (A) back onto the harp to secure the shade to the lamp.

4. Install one 150W max. Type A, medium base bulb into the socket.

5. Insert plug (E) into wall outlet.

** To clean, use a soft cloth only. Do not use any chemical or abrasive cleaners. **

IMPORTANT SAFETY INSTRUCTIONS:

* This lamp has a polarized plug (one blade is wider than the other) as a feature to reduce the risk of electric shock. This

plug will ﬁ t in a polarized outlet only one way. If it does not ﬁ t fully in the outlet, reverse the plug. If it still does not ﬁ t,

contact a qualiﬁ ed electrician. Do NOT alter the plug.

* Do not use with an extension cord unless the plug from the lamp can be fully inserted into the extension cord receptacle.

* Switch power off and remove plug from the wall outlet before replacing the bulb.