Installation & Assembly

JONATHAN

ADLER

ENTERPRISES

•

333 HUDSON STREET 7TH FLOOR NY, NY 10013

•

T. 212.645.2802 F. 212.645.3072

•

jonathanadler.com

URNIT

URE

New Bacharach Swivel Chair

Assembly Instruction

 For ease of assembly two people are recommended.

Parts Included:

Box 1:

 (1pc) Base – A

 (1pc) Cushion Seat –B

Assembly Instructions:

1. Remove all the components from their boxes and place them on a carpeted or scratch-free

surface.

2. Place the Base (A) upside down and screw Leveler ① onto the corresponding hole on bottom

of the Base (A).

Hardware Enclosed:

①

D24*1.25x15mmL

4pcs

②

1/4-20Tx45mmL

4pcs

③

Allen Wrench

1pc

PAGE 1
F URNITURE New Bacharach Swivel Chair Assembly Instruction  For ease of assembly two people are recommended. Parts Included: Box 1:  Hardware Enclosed: (1pc) Base – A ① 4pcs D24*1.25x15mmL ② 4pcs 1/4-20Tx45mmL  (1pc) Cushion Seat –B ③ 1pc Allen Wrench Assembly Instructions: 1. Remove all the components from their boxes and place them on a carpeted or scratch-free surface. 2. Place the Base (A) upside down and screw Leveler ① onto the corresponding hole on bottom of the Base (A).
PAGE 2
① A 3. Turn over the Cushion Seat (B) on the ground and put the Base (A) upside down onto the Bottom of Cushion Seat (B). Secure Screw ② into drilled hole using Allen Wrench ③ to assemble Base (A) and Cushion Seat (B) tightly. Make sure the lowest side of top plate sits behind. ② Lowest Side B 4. Turn back the assembled chair on the ground and adjust the Levelers ① if needed to have the Base (A) stay level. Assembly is completed.