Installation Sheet

1. Fix the mounting bracket(A) to the outlet box with machine screw(B).

2. Make wire connections, with wire connectors(D), following the reference chart listed below.

*Note: When parallel wire ( SPT I & SPT II ) is used. The neutral wire is square shaped

and ridged and the hot wire will be round in shape and smooth. ( See Illustration on left. )

Clear, Brown, Gold or Black without Tracer (colored

stripes) Clear, Brown, Gold or Black with Tracer (colored stripes)

Insulated Wire (not green) with copper metal conductor Insulated Wire (not green) with Silver metal conductor.

Black White

* Parallel Cord (round & smooth) * Parallel Cord (square & ridged)

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and

hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.

Estimated Assembly Time: 20 minutes.

Connect, Hot, Black or Red Outlet Supply Wire to: Connect, Neutral, White Outlet Supply Wire to:

2/2

Grounding Instructions:

a) For installation in the United States: Wrap ground wire from outlet box around green

ground screw on mounting bracket, no less than 2" from wire end. Tighten ground screw. If

fixture is supplied with a ground wire, connect to outlet ground wire with a wire connector.

b) For installation in Canada: If fixture is supplied with ground wire, wrap ground wire

around green grounding screw on mounting bracket. Tighten ground screw.

3. Raise the canopy(F) to the ceiling and secure the canopy by fixing the the collar loop(E)

to the mounting screw(C ), then fix the canopy by collar loop ring(E)

4. Check to insure the wires go through the chains(G). Fix the fixture loop(H) to the fixture body(I).

5.Screw the Chain(G) to the collar Loop(E) and the Fixture Loop(H) with Closable Links diagram.

6. Install bulbs(J). Be sure to use light bulb(s) with wattage no greater than specified on this

fixture. Always make sure that electrical current is turned off before changing bulbs.

ENJOY YOUR LAMP

PLEASE USE TYPE"A" BULB MAX 40-WATT OR CFL BULB MAX 13-WATT OR LED BULB MAX 9 -WATT

THERE ARE 1PC 4-WATT LED BULB IN THE BOX

ENJOY YOUR LAM

2/2