Installation Guide

ManualsBrandsJONATHAN Y ManualsLightingLiam 23.25 in. 3-Light Vanity Light with Bathroom Hardware Accessory Set, Oil Rubbed Bronze/Gold Painting (5-Piece)

Installing the towel ring

2. Place the towel ring (P) over the short mounting bracker (K) and use the hex key (O) to secure it in place by using screw (N).

Installing the robe hook

2. Place the robe hook (Q) over the short mounting bracker (K) and use the hex key (O) to secure it in place by using screw (N).

Installing the toilet paper holder

2. Place the toilet paper holder (R) over thelong mounting bracker (L) and use the hex key (O) to secure it in place by using screw (N).

NOTE: The toilet paper holder Can be installed in left and right instal.

Installing the towel bar

1. Place the towel bar (T) to the body of towel bar (S).

3. Place the bod

of towel bar

(

)

over thelon

mountin

short mountin

bracket

(

)

and use the hex key (O) to secure it in place by using screw (N).

1. Determine the location for the toilet paper holder (R). Using the long mounting bracket (L) as a template, mark the location

of the holes for the wall anchors (J). Drill the appropriate size holes for the wall anchors (J). (the holes should be slightly

smaller than the size of the wall anchors (J). ). The wall anchors (J) are then punched into the drilled holes, And allowing for

the wood screws (M) to protrude through the hole on long mounting bracket (L), then screw the wood screw (M) to the wall

anchors (J).

2. Determine the location for the body of towel bar (S). Using the long mounting bracket (L) as a template, mark the location of the holes for the wall anchors (J). Drill the

appropriate size holes for the wall anchors (J). (the holes should be slightly smaller than the size of the wall anchors (J). ). The wall anchors (J) are then punched into the

drilled holes, And allowing for the wood screws (M) to protrude through the hole on long mounting short mounting bracket (K), then screw the wood screw (M) to the wall

anchors (J).

1. Determine the location for the towel ring (P). Using the short mounting bracket (K) as a template, mark the location of the

holes for the wall anchors (J). Drill the appropriate size holes for the wall anchors (J). (the holes should be slightly smaller than

the size of the wall anchors (J). ). The wall anchors (J) are then punched into the drilled holes, And allowing for the wood

screws (M) to protrude through the hole on short mounting bracket (K), then screw the wood screw (M) to the wall anchors (J).

1. Determine the location for the robe hook (Q). Using the short mounting bracket (K) as a template, mark the location of the

holes for the wall anchors (J). Drill the appropriate size holes for the wall anchors (J). (the holes should be slightly smaller than

the size of the wall anchors (J). ). The wall anchors (J) are then punched into the drilled holes, And allowing for the wood

screws (M) to protrude through the hole on short mounting bracket (K), then screw the wood screw (M) to the wall anchors (J).

3/3