Installation Guide

ManualsBrandsJONATHAN Y ManualsLightingAvalon 26 in. 3-Light Farmhouse Cottage Vanity Light with Bathroom Hardware Accessory Set, Oil Rubbed Bronze (5-Piece)

Installing the towel ring

1. Determine the location for the towel ring (O). Using the mounting bracket (K) as a template, mark the location of the holes for

the wall anchors (J). Drill the appropriate size holes for the wall anchors (J). (the holes should be slightlysmaller than the size of

the wall anchors (J). ). The wall anchors (J) are then punched into the drilled holes, And allowing for the wood screws (L) to

protrude through the hole on mounting bracket (K), then screw the wood screw (L) to the wall anchors (J).

2. Place the towel ring (O) over the mounting bracker (K) and use the hex key (N) to secure it in place by using screw (M).

Installing the robe hook

1. Determine the location for the robe hook (P). Using the mounting bracket (K) as a template, mark thelocation of the holes for

the wall anchors (J). Drill the appropriate size holes for the wall anchors (J). (the holes should be slightlysmaller than the size of

the wall anchors (J). ). The wall anchors (J) are then punched into the drilled holes, And allowing for the wood screws (L) to

protrude through the hole on mounting bracket (K), then screw the wood screw (L) to the wall anchors (J).

2. Place the robe hook (P) over the mounting bracker (K) and use the hex key (N) to secure it in place by using screw (M).

Installing the toilet paper holder

1. Determine the location for the toilet paper holder (Q). Using the mounting bracket (K) as a template, mark the location of the

holes for the wall anchors (J). Drill the appropriate size holes for the wall anchors (J). (the holes should be slightlysmaller than

the size of the wall anchors (J). ). The wall anchors (J) are then punched into the drilled holes, And allowing for the wood

screws (L) to protrude through the hole on mounting bracket (K), then screw the wood screw ( L) to the wall anchors (J).

2. Place the toilet paper holder (Q) over the mounting bracker (K) and use the hex key (N) to secure it in place by using screw (M).

NOTE: The toilet paper holder Can be installed in left and right instal.

Installing the towel bar

1. Place the towel bar (S) to the body of towel bar (R).

2. Determine the location for the body of towel bar (R). Using the mounting bracket (K) as a template, mark the location of the holes for the wall anchors (J). Drill the appropriate

size holes for the wall anchors (J). (the holes should be slightlysmaller than the size of the wall anchors (J). ). The wall anchors (J) are then punched into the drilled holes, And

allowing for the wood screws (L) to protrude through the hole on mounting bracket (K), then screw the wood screw (L) to the wall anchors (J).

3. Place the body of towel bar (R) over the mounting bracker (K) and use the hex key (N) to secure it in place by using screw (M).

3/3