Instructions / Assembly

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and

hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.

Estimated Assembly Time: 20 minutes.

1. Fix the mounting bracket(B) to the outlet box with mounting screw(C).

2. Make wire connections, with wire connectors(A), following the reference chart listed below.

Connect, Hot, Black or Red Outlet Supply Wire to:

Connect, Neutral, White Outlet Supply Wire to:

Black

White

* Parallel Cord (round & smooth)

* Parallel Cord (square & ridged)

Clear, Brown, Gold or Black without Tracer (colored stripes)

Clear, Brown, Gold or Black with Tracer (colored stripes)

Insulated Wire (not green) with copper metal conductor

Insulated Wire (not green) with Silver metal conductor.

*Note: When parallel wire ( SPT I & SPT II ) is used. The neutral wire is square shaped

and ridged and the hot wire will be round in shape and smooth. ( See Illustration on left. )

Grounding Instructions:

a) For installation in the United States: Wrap ground wire from outlet box around

mounting screw(C) on mounting bracket(B), no less than 2" from wire end. Tighten ground screw. If

fixture is supplied with a ground wire, connect to outlet ground wire with a wire connector.

b) For installation in Canada: If fixture is supplied with ground wire, wrap ground wire

around mounting screw(C) on mounting bracket(B). Tighten ground screw.

3. Attach the Canopy of lamp body(E) to the Mounting bracket(B)and fix it with the

Screw(D)

4. Put the Shade(F) onto socket and fix it by Ring(G)

5. Screw the Bulb(H) onto the sockets.

Be sure to use light bulbs (F)with wattage no grater than specified on this fixture.

Always make sure that electrical current is turned off before changing bulbs.

PLEASE USE ON/OFF TYPE"A" BULB MAX 40-WATT OR CFL BULB MAX 13-WATT OR LED BULB

MAX 9-WATT, THERE ARE 1PC LED 9-WATT BULB IN THE BOX

ENJOY YOUR LAMP

2/2