Installation Guide

STEP

Using the p of your ﬁnger or ﬁngernail,

depress the pin into the ceiling canopy. This

will release the cable locking mechanism.

While holding the pin in place, simply pull down (or

push up) on the cable. Repeat this for each cable to

raise and lower the height of the ﬁxture.

This chandelier is outﬁed with easy-to-use locking pins which allow

you to change the height of the ﬁxture at any me aer the ﬁxture has

been installed. This not only makes installaon a breeze, but allows you

to get creave. Raise or lower just one side, or ﬁnd that perfect height

for your room. It’s as easy as just TWO STEPS:

PAGE 1
This chandelier is outﬁtted with easy-to-use locking pins which allow you to change the height of the ﬁxture at any time after the ﬁxture has been installed. This not only makes installation a breeze, but allows you to get creative. Raise or lower just one side, or ﬁnd that perfect height for your room. It’s as easy as just TWO STEPS: STEP 1 STEP 2 Using the tip of your ﬁnger or ﬁngernail, depress the pin into the ceiling canopy. This will release the cable locking mechanism.