Instructions / Assembly

Assembly-Hanging the Fan
11
8.Hanging the fan
Mounting
Bracket(A)
Canpoy(B)
Keyway
Pin(S)
9.Wire connection
¨ Connect the black, white, and blue wires on
the Receiver(L) to the same colored wires
on the fan using a wire connecting nut(EE).
¨ Connect the green fan wires to the
household ground wire(this may be a green
or bare wire) using a wire connecting
nut(EE).
¨ Connect the receiver (L) black wire to the
household Live line using a wire
connecting nut (EE).
¨ Connect the receiver (L) white wire to the
household Zeroline using a wire
connecting nut (EE).
¨ Secure each wire connecting nut using
electrical tape.
WARNING: To avoid possible electrical shock, turn
the electricity off at the main fuse box before wiring.
lf you feel you do not have enough electrical wiring
knowledge or experience, contact a licensed
electrician.
WARNING: Each wire nut supplied with this fan is
designed to accept up to one 12-gauge house wire
and two wires from the fan. if you have larger than
12-gauge house wiring, or more than one house wire
to connect to the fan wiring, consult an electrician
for the proper size wire nuts to use.
Blue
EE
Electrical
tape
Black
White
Black
White
Green
L
N
Ground wire
Outlet box
in the ceiling
(SS)
Receiver(L)
¨ Notice the hanger ball on the end of the
Down Rod is grooved down one side.
This keyway fits over the small Keyway
Pin(S) on the inside of the Mounting
Bracket(A) and keeps the celling fan
from spinning on the Mounting
Bracket(A).
¨ Using your step ladder, lift the fan and
place the hanger ball in the center of
the Mounting Bracket(A) with the
Keyway Pin(S) inserted into the keyway
on the ball. Turn the fan left and right
slightly to make sure it is seated on the
bracket with the Keyway Pin(S) in the
keyway.