Instructions / Assembly

13
Assembly-Attaching the Lights
13.Connecting lamp wire
¨ Insert the“white"line in the switching
box of the motorinto the“white"line of
the light and tie insulated rubber tape.
¨ Insert the“Blue"line in the switching
box of the motor into the“Blue"line of
the light and tie insuklated rubber tape.
¨ Take the wire into the lamp shade of the
motor
¨ Align the opening of lamp shade of the
light at switch locking position of the
positive and negative rotation of the
motors witching box. Place the cover. Align
the screw holes on the upper switching
box, Screwin the Screw(JJ) of the Crystal
shade(H).
14.Tighten the screw of the box cover
Crystal shade(H)
Lamp bulbs(M)
Assembly-Attaching the Lights
Blue
White
Crystal shade(H)
¨ Take out three lamp bulbs (M) from the
packaging box and install them on the
lamp holders inside the Crystal
shade(H). Rotate them clockwise to
install and tighten the lamp bulbs(M).
¨ Please use Type"B" bulb MAX 40-watt
or led bulb MAX 9-watt,there is led 4-
watt bulb in the box.
15.Attaching the lamp bulbs