Instructions / Assembly

15
Use of remote control
Preparing the remote control
¨ Remove the remote control (K) battery
cover by pressing firmly on the arrow and
sliding the cover off.
¨ Install two 1.5V batteries (do not
included).
¨ Replace the battery cover on the remote
control (K)
NOTE: The frequencies on your receiver
and remote contro!have been preset at the
factory.
NOTE: The battery will weaken with age and
should be replaced before leaking takes
place, as battery leakage damages the
hand unit. Dispose of the used battery
properly and keep the battery out of the
reach of children.
Installing remote control bracket
NOTE: Screw wall anchors are included for
extra support. The included screws are
designed to screw easily into the wall. lf you
would like a more permanent or secure hold,
install the wallanchors prior to attaching the
wall cradle to the wall.
¨ Position the wall cradle in the desired
position and attach it to the wall using
the included wall cradle screws.
remote control(K)
AAA 1.5V
Fan Stop
Fan Speed High level
Fan Speed Middle level
Fan Speed Low level